Products 1-18 of 18
Show
Availability: In Stock inventory
Item #: chbs-1221 -
Ford Y block Cylinder head bolts Ford Y block early to 56 and some 56 with two different bolt lengths. caution many Ford Y block head have been swapped out over the years so double check before ordering. in 56 the a change to 3 different lengths was made. The three bolts in the center under the rocker shaft are the same, The two bolts on the end of each head are longer about a 1/4 inch inspect heads before ordering bolt to sure you get the correct ones other wise engine damage could happen...
Availability: Out of Stock
HeadBolts brand engine fasteners
Item #: chbs-1217 -
this kit is for 56 and -later 3 length bolts Ford y block v-8 Caution Ford Y block head bolts 239, 256, 272, 292 and 312 engines up to 1956 heads used two different length bolts in 56 the a change to 3 different lengths was made. The three bolts in the center under the rocker shaft are the same, The two bolts on the end of each head are longer about a 1/4 inch. Inspect heads before ordering bolts to insure you get the correct ones other wise engine damage could happen most 56 and up cylinder...
Availability: Out of Stock
HeadBolts brand engine fasteners
Item #: dp-1 -
dowel pin kit for head to engine block contains 4 split type pins fits sb ford 260,289,302,351w m and c engines 351c ,351m and 400 ford y blocks v-8 272,292and 312 this kit also fits other engines not listed aboveincluding some marine enginesdp-1
Availability: Out of Stock
Totally Stainless bolts
Item #: 6-0950 -
Engine & accessory fastener kits Ford y block engines 272 292 and 312 Every engine kit includes component kits for the Distributor, Fuel Pump, Intake, Oil Pan, Oil Pump Mount, Thermostat, Timing Chain Housing, Valley Cover, Valve Covers, and Water Pump. Over 115 pieces stainless hex head bolt kit for trucks and T Bird ,totally stainless brand 6-0950 for y block items ...
Availability: In Stock inventory
Totally Stainless bolts
Item #: 6-0779 -
Engine & accessory fastener kits Ford y block engines 272 292 and 312 Every engine kit includes component kits for Distributor, Fuel Pump, Intake, Oil Pan, Oil Pump Mount, Thermostat, Timing Chain Housing. Valley Cover, Valve Covers, and Water Pump. Over 115 pieces stainless hex head bolt kit for all other passenger cars. totally stainless brand 6-0779 ...
Availability: In Stock inventory
ARP automotive racing products
Item #: 200-2802 -
ARP Flywheel bolts for 3,4 and 5 speed manual transmission and marine flywheels 7/16 thread 100-2801 old numbernew number 200-2802
Availability: In Stock inventory
HeadBolts brand engine fasteners
Item #: lfw-210 -
Flywheel bolts for 3,4 and 5 speed. manual transmission and marine flywheels. 7/16 thread-20 x 1.00 fits small block v8 265,265,267,283,307,327,350 and 400. does not fit sb chevy engine with 1 pc rear seal. all big block chevy 366 ,396 402 427 454. except some industrial engines that my use 1/2 thread ford inline six that use 7/16 thread 240 300 all small and big block fords ohv engineslfw-210
Availability: In Stock inventory
Totally Stainless bolts
Item #: 6-5574 -
stainless locking header bolt set of 14(14) Header Bolts - Size: 3/8-16 x 1''Head Style: Six Point - High Strength Polished (3/8'' Wrench Head)fit these engines and moreford y block chvy 348 /409buick v-8 except nail head #6-5574
Availability: In Stock inventory
ARP automotive racing products
Item #: 154-7906 -
ARP oil pump drive shaft made from arp2000 and heat treated to 220,000psi for Ford Y block V-8 engines 272 292 and 312. # 154-7906
Availability: Out of Stock
ARP automotive racing products
Item #: 154-6005 -
Ford 239-256-272-292 Y block Rod Bolt Kit for rods marked EBU only Kit #: 154-6005 Press fit ARP rod bolt installation.make sure there there is a adequate chamfer. Around the top of the connecting rod bolt hole to clear the radiusunder the head of the bolt. Press the bolt into the rod and put on cap.Use ARP lube on threads and nut face .torque to 50 ft-lbs
Availability: Out of Stock
HeadBolts brand engine fasteners
Item #: m-10 -
valve locks / keeper heavy duty full set single groove 11/32 valves 7 degree OEM replacement type. this kit comes with 32 pcs for v-8 . also fits 6 cylinder and some 4 cylinder engines 11/32 Valve locks or keepers #m-10
Availability: In Stock inventory
Totally Stainless bolts
Item #: 6-0497 -
The Rams Horn Exhaust Kit for Ford Y-Block. Stainless steel kit includes (6) 1'' and (8) 1 3/4'' bolts and washers.Head Style: Hex Head6-0497
Availability: In Stock inventory
Totally Stainless bolts
Item #: 6-0488 -
The Stock Exhaust Kit for Ford Y-Block. The kit includes 1'' stainless steel boltsHead Style: Hex Head
Availability: In Stock inventory
ARP automotive racing products
Item #: 154-6004 -
rod bolts for ford y block 239-312 arp 154-6004. ARP rod bolts for 239,256,272,292 y block with rod marked ECU. also fits for 312 ford v8 engines .154-6004