Ford Y block Cylinder head bolts
Ford Y block early to 56 and some 56 with two different bolt lengths.
caution many Ford Y block head have been swapped out over the years so double check before ordering.
in 56 the a change to 3 different lengths was made. The three bolts in the center under the rocker shaft are the same, The two bolts on the end of each head are longer about a 1/4 inch
inspect heads before ordering bolt to sure you get the correct ones other wise engine damage could happen
most up to 56 cylinder head bolts
set does both heads,
cylinder head kit made with all arp head bolts and washers fits heads that use two different length head bolts, note that bolts have 1/2 inch hex wrenching
These are hi performance head bolts suitable for higher compression and forced induction and are a great upgrade from stock bolts
torque is 70 foot pounds done in three steps 30, 55 then 70 ft pounds . Cylinder head washer goes inner chamfer side up
kit contains
10 long bolts
10 short bolts
20 washers
chbs-1221