265 / 283 / 327 small block Chevrolet 1955-1967

Camshaft bolts and lock plate fits bb chevy sb chevy and chevy 90 degree v6 after bolts are tight bend tabs to prevent bolts loosening also hold cam buttons in placeCamshaft bolts and lock plate #4605

crankshaft key one long    3/16x1-3/8 wk-3

crankshaft key short set  3/16 x 3/4 2pc kit wk-2

Cylinder head bolts 1/2 inch hex head with washersFull set of 34 bolts and washers does both cylinder heads ARP sb chevy fits Cast iron OEM , 283 305 327 350 and 400 enginesGen III Vortec/Truck & most Edelbrock LT-AFR, Brodix-8,-10,-11,-11xb SB Chevy head bolts performance hex headlt-1 vin 5  1996 5.7lt-1  vin p  1992-1997  5.7tpi   vin 8     1991-1992  5.7tbi vin7   1991-93    5.7tbi  vin K ...

Cylinder head bolts hex head ARP sb chevy outer row only stainless the rest are black oxide fits Cast iron OEM , 283 305 327 350 and 400 Gen III Vortec/Truck & most Edelbrock LT-AFR, Brodix-8,-10,-11,-11xb SB Chevy head bolts performance hex head great for marine applications full set for both heads arp 134-3603

Cylinder head bolts sb chevy 5/8 hex head SB Chevy head bolts old style 5/8 inch hex head 34 pcs does both cylinder heads 262 265 267 283 307 327 350 and 400 chbs-1047

cylinder head washer hardened 7/16 id  .812  outside black oxide coated ARP apw1316  sold as 1 each

black oxide cylinder head washers thin type 7/16 34 pcspioneer brand# s-1018

Distributor hold down stud,nut and washerhigh stranghth black oxideARP # 130-1702

Dowel pin kit engine to bell housing 2pcs5/8 diameterdp-9fits most chevy engines and otherschevy 153 250 292 linline 63.8 4.3 v6sb and bbpontiac v8olds v8Cadillac push rod v8

dowel pins assure prefect alignment between the the cylinder head and the engine block missing pins can cause problem with intake fitment set of 4 pcs enough to do both Heads on v-8 and v-6 engines kit fits small block chevy 265,267,283,307,302,327,350 and 400 200,229, and 4.3 v-6 pontiac v-8 engines 350 - 389 - 400 - 421 - 455 and others 5/16 dia 1/2 long set of 4 dp-4

Engine & accessory fastener kit Totally stainless brand 6-5699 small block with short water pump. with steel valve cover stainless steel. HEX / INDENTED HEX.  ORIGINAL STYLE: 63 & UP intake manifold bolts valve cover bolts thermostat housing bolts oil pan bolts distributor bolts timing cover bolts fuel pump bolts water pump bolts ...

283ci,305,307 327ci, 350ci, 400ci with 2pc rear seal engine finish kit 4 Head Dowel .3125 x .565 2 Timing Cover .2466 x .630 3 Cam Bolt 5/16-18 x 3/4 Cap Screw, Hex Drive 1 Woodruff Key 3/16 x 1-3/8 2 Woodruff Key 3/16 x 3/4 #fkc-1 ...

HEX/INDENTED HEX - ORIGINAL STYLE stainless steel : 63 -86 small block Chevrolet ENGINE KITS- Every engine kit includes component kits for the Distributor, Fuel Pump (except TPI engines), Intake, Sheet Metal Oil Pan, Thermostat, Sheet Metal Timing Cover, Valve Covers, and Water Pump. For long style water pump engines does not fit REINFORCED SIDE RAILS oil pans 6-5698

Flexplate bolts by ARP for automatic transmissions7/16 thread100-2901

ARP Flywheel bolts for 3,4 and 5 speed manual transmission and marine flywheels 7/16 thread 100-2801 old numbernew number 200-2802

Flywheel bolts for 3,4 and 5 speed. manual transmission and marine flywheels. 7/16 thread-20 x 1.00 fits small block v8 265,265,267,283,307,327,350 and 400. does not fit sb chevy engine with 1 pc rear seal. all big block chevy 366 ,396 402 427 454. except some industrial engines that my use 1/2 thread ford inline six that use 7/16 thread 240 300 all small and big block fords ohv engineslfw-210

Freeze / core / frost plug kit steel for chevy sb v8  262,265,267,283,302,327,350 and 400 for block only , freeze that go into coolant jacket are steel, threaded oil galley , cam plug and other oil galley plugs are steel pic may show brass but these are steel fpk-100

Freeze / core / frost plug kit steel for chevy sb v8 262,265,267,283,302,327,350 and 400for block onlyplugs that go into coolant jacket are brass, threaded oil galley , cam plug and other oil galley plugs are steelfpk-100b

ARP fuel pump push rod for small block Chevrolet v-8 and v-8 based v-6   Chevrolet Small Block (note: not for use on roller cams) ARP Fuel Pump Pushrod Kit Small Block Chevy 1/2" Diameter, 5.750" Over All Length 134-8701

SpeedMaster high performancr heavy duty balancer 12 pt bolt with thick 1-3/4 washer black oxide coated for sb chevys 283 ,262,265,397,327,350 and 400 chevy inline 6 including 194 ,230 250 and 292 truck engines chevy v-6 200 ,229 / chevy 3.8 and 262 / 4.3 liter 153 4 cylinder not all engines are drilled for this bolt thread size is 7/16 -20 # 292.1001

heavy duty balancer bolt kit with thick 1-3/4 washer and lock washer and bolt for sb chevys 283 ,262,265,397,327,350 and 400 chevy inline 6 chevy v-6 153 4 cylinder not all engines are drilled for this bolt thread size is 7/16 -20 # bk-18

12 pt Balancer Bolt Kit harmonic balancer bolt/ washer sb chevy  arp 134-2501harmonic balancer bolt installationlubricate thread and the under head of the bolt.using ARP ultra lube.torque to 80 ft pounds

Square Drive Balancer Bolt Kit harmonic balancer bolt/ washer sb chevy  Socket Size(s)1-1/8 hex, 1/2 square drive internal arp 134-2503 harmonic balancer bolt installation lubricate thread and the under head of the bolt. using  ARP ultra lube. torque to 80 ft pounds  

Chevrolet Small Block, 0.750˝ UHL 12 point black oxide Header Bolt  Kit Kit #: 100-1201

Main bolts and studs for small journal blocks 265 55-57 , 283 57-67 327 62 to 67 ARP 134-5002  mains

Chevrolet V6 & V8 mount to block, hexMotor Mount Bolt KitKit #: 130-3102

motor mount to frame mount bolts ARP black oxide hex head  fits most chevy enginesSocket Size(s)1/2 hex, 11/16 hex 130-3105

oil pump drive these have pinned steel sleeve not a plastic is55ea must when using high volome or high pressure oil pumps

Oil Pump Driveshaft sb chevy  heavy duty steel heat treated oil pump shaft. full steel sleeve.  fits sb chevy 2620,267,302,307,350 and 400 Chevrolet Small Block, up to 1996 134-7901

Chevy  small block V8 and 90 degree v6 hexOil Pump Stud KitKit #: 230-7001

Rocker arm locking nuts 3/8 thread set of 16 pcs OEM style self locking nk-1

Rocker arm stud screw in type used to replace damaged or pulled press in studs 3/8 top thread , simply pull out old stud by stacking washers and jack out out stud with rocker nut , then tap hole 7/16-14 , use thread sealer on the threads as studs go into water sold 1 each RM-348

timing cover bolt kit 10 pcs hex head with star washer fits sb / bb chevy with steel timing covers 3.8 and 4.3 90 degree chevy v6 also fits other not listedbk-16

valve locks / keeper heavy duty  full set single groove 11/32 valves 7 degree OEM replacement type. this kit comes with 32 pcs for v-8 . also fits 6 cylinder and some 4 cylinder engines 11/32 Valve locks or keepers #m-10